Cementing Equipment

Capacity 50 CuFt – 220 CuFt (Single Silo)

All steel welded construction from SA 36/SA 516 GR 70/eqvt.

Aeration jet system

Buried /Above Ground type with Hopper outside

Fill, vent and discharge lines are easily accessible

Lifting lugs MPI tested & Certified for empty lift

Hydro fill tested to suit design standard

External grit blasted to SAE 2.5 with epoxy paint system

Options:
Twin Cutting Bottle–Capacity 2× 50 CuFt
Custom design and equipment on request
Certification: U Stamp (On request)

Capacity 350 CuFt - 500 CuFt

All steel welded construction from SA 36/SA 516 GR 70/eqvt steel plates

Aeration jet system

Provision for mounting compression load cell

Fill, vent and discharge lines easily accessible

Lifting lugs MPI tested & Certified for empty lift

Hydro tested to suit design standard

External grit blasted to SAE 2.5 with Epoxy paint system

Options:
Custom design and equipment on request
Certification: U Stamp (On request)

Capacity 3 x 700 CuFt

All steel welded construction from SA 36/SA 516 Gr70 /eqvt steel plates

Tandem axle with heavy duty suspension

Aeration jet system.

Fill and discharge lines are easily accessible

Certification : U Stamp (On request)

Lifting lugs are MPI tested & Certified for empty lift

Hydro fill tested to suit design standard

External grit blasted to SA 2.5 & epoxy paint system

Options:
Dual pod (Bipod) semi trailer – 2 × 450 CuFt
Compressor on request
Custom design and equipment on request
Certification: U Stamp (On request)

Capacity 70 CuFt- 75 CuFt

All steel welded construction from SA 36/eqvt steel plates

Aeration jet system

Fill, vent and discharge lines are easily accessible

Lifting lugs MPI tested & Certified for empty lift

Hydro tested to suit design standard

External grit blasted to SAE 2.5 with Epoxy paint system

Options:
Custom design and equipment on request
Certification: U Stamp (On request)

Capacity 28 CBM to 43 CBM

All steel welded construction from SA 36/SA 516 Gr70 eqvt steel plates

Tandem / Tridem axle with heavy duty suspension

'V' type self supporting body

Aeration system from Hermanns (GmBh)

Manholes are located at the top for easy access

Hydro tested to suit design standard

Fill, vent and discharge lines easily accessible

External grit blasted to SAE 2.5 with Epoxy paint system

Options:
Provision for dual and triple compartment. (On request)
Provision for surge tank at the rear side of trailer (On request)
Diesel engine & compressor fitted based on customer’s advice
Custom design and equipment on request
Certification: U Stamp (On request)

Capacity 14cbm (500cuft).

Material of construction A36/ 516gr70.

Working pressure 30psig. Test pressure 38psi

With Fill, vent, discharge and air line.

Axle 2x16T

Tyres 12R24 with Trilex type rim.

With Hermanns aeration system.

With: Betico SBD compressor driven by Deutz engine

Capacity: 2 x 50 BBL to 2 x 100 BBL

Shape of tank: Cylindrical / Rectangular

Suitable to mix cement etc.

All steel welded construction from SA36 or eqvt steel plates

Tandem axle with heavy duty suspension

Power pack by ASECO / Free Issue

Manholes are located at top for easy access

The operations are controlled from control panel

External grit blasted to SA 2.5 & Epoxy paint system

Options:
Valves - Manual / Actuator controlled
Custom design and equipment on request

Capacity: 500 BBL

Tank construction: corrugated panels made of A36 / Eqvt.

Skid material: S355 JR or S275JR / Eqvt.

Provision on top for fitting agitators

Lifting lugs provided & tested for empty Lifting

Tank hydro tested

Tank Grit blasted to SAE 2.5 Epoxy paint system externally & internally

Material of construction A36.

Centrifugal pump skids of size 5x6x11 and 10x12x23

Fitted with diesel engine.

With C pump operated by PTO.

With Control panel

With diesel tank

With required pipe fittings and connections.

With drip plate at the bottom.

With fork lift pockets and working lights.

Capacity 400-1200 Cuft.

All Steel welded construction from SA 36/ eqvt steel plates.

Lift frame.

Gravity discharge.

With DNV 2.7-1 certification for frame if required.

Provision for mounting compression load cell.

Fabricated gate valve with rack & pinion or Pneumatic.

External grit blasted to SA 2.5 & epoxy paint system

Options :
Round tank - 1200CuFt.
Special design and equipment on request.

Capacity 70 CuFt

All steel welded construction from SA 36/ eqvt steel plates.

Vertical type

With canvas & shaker assembly

Manholes are located for easy access

Fill, vent and discharge lines are easily accessible.

Lifting lugs are MPI tested & Certified for empty lift.

Pneumatically tested to suit design standard.

External grit blasted to SA 2.5 & epoxy paint system

Options:
Special design and equipment on request.

The pressure silo is designed to store cement, bentonite, barite etc.

The fill, vent and discharge lines are easily accessible.

The pressure relief valve provides safe unloading.

The interior is designed to allow dry material to flow out under air pressure.

The silo is equipped with 3” aeration coupling with air pad/air jet system as per requirements.

Manholes are located at bottom for easy access.

Vertical/Horizontal skid.

There are different types of cement silos which generally come equipped with an electronic weighing system with digital display and printer. This allows any quantity of cement or powder discharged from the silo to be controlled and also provides an accurate indication of what remains inside the cement silo. The Cement Silo along with the Weigh Batch Blender is designed to mix cement, bentonite, barite, liquid additives, etc. for oilfield use. One of our USP’s is that based on our clients’ needs we provide cement silos depending on the bulk plant requirement.

Capacity 1000 CuFt- 3500 CuFt (Single Silo)

All steel welded construction from SA 36/SA 516 GR 70/eqvt steel plates

Provision for mounting compression load cell (Optional)

Ladder with bolted cage (Optional)

Certification:- U Stamp (On request)

Lifting lugs are MPI tested & Certified for empty lift

Hydro fill tested to suit design standard

External grit blasted to SA 2.5 & epoxy paint system

Options:
Twin Silo- Capacity 2 x 1000 Cu Ft
Provision for manholes at top on request
Special design and equipment on request